Bridge of Oich

In 1849 an old stone bridge that spanned the River Oich near Aberchalder was destroyed by flooding. To reduce the risk of a new bridge being damaged by similar flooding, it was decided that a single-span bridge was required to replace the old bridge. English engineer James Dredge was engaged to provide such a bridge. Dredge used his patented 'taper principle' for the bridge which was opened in 1854.

The bridge was designed by James Dredge, an engineer from England. Dredge used his patented 'taper principle' design for the bridge. The bridge uses a double cantilever system where two opposing cantilevers are supported by suspension chains giving it the appearance of a classic suspension bridge. The span of the bridge is 155 ft and the two main chains are 17 ft apart. Each of the main chains is made from a series of wrought-iron eye-rods varying in length from 6 ft to 7 ft and with a nominal diameter of 7/8 in. The main chains hang over 18 ft high granite towers and one end of each chain is anchored to the bridge at mid-span and the other ends are anchored below ground inland of the…